Acoustic Wall Trade Resource

CSI 3-Part Specification — Section 09 84 00

OrangePiel CSI 3-part specification for Section 09 84 00 (Acoustical Room Components), Division 09 (Finishes). Editable Word document + signed PDF, formatted per CSI SectionFormat. Part 1 General (references, submittals, QA), Part 2 Products (manufacturer, materials, finishes), Part 3 Execution (examination, prep, installation, QC). At a glance — drop-ready CSI 3-part specification for Section 09 84 00, formatted per CSI SectionFormat. Editable Word + signed PDF. Issued for OrangePiel printed acoustical panels. Specifiers replace the manufacturer / model / finish placeholders, edit project-specific quantities and locations, and incorporate it directly into the project specification book. Part 1 General sections: 1.01 Section Includes (acoustic panels with dye-sublimation print, mounting hardware Z-clip / French cleat / impaling clip / aircraft cable, on-site acoustic calibration); 1.02 Related Sections (06 16 00 Sheathing, 09 21 16 Gypsum Board, 12 24 00 Window Shades); 1.03 References (ASTM C423, E84, E2235, NFPA 701, ANSI/ASA S12.60, AATCC 16.3, IBC Chapter 8, LEED v4.1, WELL v2); 1.04 Definitions; 1.05 Submittals (product data, shop drawings, acoustic test reports, fire test reports, IAQ certification, colorfastness report, samples, warranty); 1.06 Quality Assurance; 1.07 Delivery, Storage, Handling; 1.08 Project Conditions; 1.09 Warranty (10 years materials + workmanship). Part 2 Products sections: 2.01 Manufacturer (OrangePiel, Richmond VA, contact); 2.02 Performance Requirements (NRC 0.85 min per ASTM C423, ASTM E84 Class A, NFPA 701, GREENGUARD Gold, AATCC 16.3); 2.03 Materials (60% recycled PET felt OR rigid mineral wool core, PVC-free dye-sublimated face fabric, mounting hardware); 2.04 Fabrication (Richmond VA workroom, 1440 DPI dye-sub, joint registration); 2.05 Finishes. Part 3 Execution sections: 3.01 Examination; 3.02 Preparation; 3.03 Installation (per shop drawing + manufacturer hardware geometry, Z-clip plumb within 1/8 inch tolerance, joint registration on multi-panel acoustic murals); 3.04 Field Quality Control (RT60 verification per ASTM E2235 when specified); 3.05 Cleaning; 3.06 Protection. Single-panel maximum dimensions: 192 inches (16 ft) on both width and height axes — seamless. Continuous-run maximum: 200 ft on a single installed surface with registered seams across panel boundaries. Custom sizing within these bounds available. Companion specifications and CAD/BIM geometry available in the same trade portal: Section 12 24 00 (Window Shades) for printed roller shades; CAD/BIM Family Pack (DWG, DXF, IFC, RFA, bundle ZIP) with Z-clip / French cleat / impaling clip / aircraft cable mounting hardware geometry for elevation drawings, wall section details, and BIM models. Manufactured in Richmond, Virginia since 2006. Installed by OrangePiel craftsmen for large client projects nationwide.