Printed TV Cover Installation
Installation guide for custom printed TV cover shades. Ceiling mount, wall mount, and recessed options.
Installing Your Printed TV Cover Shade
Installing a TV cover shade follows similar principles to standard window shade installation, with additional considerations for positioning relative to your television. This guide covers ceiling mount, wall mount, and recessed pocket installations for motorized and manual TV cover shades.
Your TV cover shade arrives fully assembled with mounting brackets and hardware included. Before beginning, verify all components are present and review the mounting method appropriate for your installation type.
Pre-Installation Planning
Verify TV Position
Your TV should already be in its final position before installing the cover shade. If you are planning to move or adjust the TV, do so first. The shade is sized specifically for your current TV position.
Locate Ceiling Joists or Wall Studs
Use a stud finder to identify solid mounting points. Ceiling joists typically run 16 or 24 inches apart. Mounting into solid framing provides the strongest installation. If mounting between joists, use toggle bolts rated for the shade weight.
Plan Electrical (Motorized Only)
Battery-powered motors require no electrical work. If you chose a hardwired motor, electrical wiring should be completed before shade installation. The motor wires need to reach an electrical junction box at the mounting location.
Ceiling Mount Installation
Most common TV cover installation method
01
Mark Bracket Positions
Center the brackets above your TV at the specified distance from the wall. Space brackets 2-4 inches from shade ends. Mark screw holes with pencil.
02
Locate Joists
Verify marked positions hit ceiling joists. Adjust positions if needed to reach solid framing. If between joists, mark for toggle bolt installation.
03
Install Brackets
Drill pilot holes. Insert anchors if needed. Secure brackets with provided screws. Verify brackets are parallel to wall and level with each other.
04
Mount the Shade
Click or slide the headrail into mounted brackets. Verify secure attachment. For motorized shades, connect power at this point.
05
Test Operation
Operate the shade through full travel. Verify it fully covers the TV when lowered and clears the TV when raised. Adjust limit settings if needed.
06
Final Adjustments
Fine-tune stopping positions so shade hangs perfectly centered over TV. For motorized, program remote and smart home integration.
Control Options
Operating your TV cover shade
Motorized Remote
Press to raise or lower. Most popular option for TV covers due to convenience. Control multiple shades with one remote.
Smart Home
Voice control through Alexa, Google, or Siri. Create automations that lower shade when TV turns off.
Wall Switch
Dedicated wall switch for motorized shades. Convenient for shades near room entrances.
App Control
Smartphone apps allow control from anywhere. Set schedules and scenes for automated operation.
Chain Drive
Manual chain operation for non-motorized shades. Reliable and no batteries required.
Spring Assist
Cordless manual operation. Pull to lower, release to raise. No cords or chains.
Troubleshooting Installation
Shade Does Not Cover Entire TV
If the shade does not fully cover the TV when lowered, verify the shade was manufactured to your ordered dimensions. If measurements were off, contact us about options. Minor coverage gaps may be addressed by adjusting mounting position slightly.
Shade Rubs Against TV When Lowering
The shade should hang approximately 2-4 inches in front of the TV face. If rubbing occurs, brackets may be mounted too close to the wall. Add standoff spacers or remount brackets further from the wall.
Motorized Shade Does Not Respond
For battery motors, ensure battery is fully charged. Check that remote is properly paired. For hardwired motors, verify power supply is connected and switched on. Consult motor manual for pairing procedures.
Installation FAQs
Do I need an electrician for motorized installation?
Battery-powered and solar-powered motors do not require an electrician. Hardwired motors require an electrician to run power to the shade location. This work should be done before shade installation.
Can the shade mount to the wall above the TV instead of ceiling?
Yes. Wall mounting is an alternative when ceiling access is difficult. Mount brackets to the wall at least 3 inches above the TV top. Use the same installation process adapted for wall attachment.
Will heat from my TV affect the shade?
Modern TVs produce minimal heat. The shade hangs 2-4 inches from the TV face, providing adequate ventilation. There is no concern about heat damage under normal conditions.
Can I hide the mounting brackets?
Yes. Optional valance covers conceal the headrail and brackets for a finished built-in appearance. Specify valance when ordering.
See Our Work
Browse examples of our custom printed products
Need Installation Assistance?
Contact our support team or request professional installation referrals.
Professional Installation Techniques
While TV cover installation can be accomplished by handy homeowners, professional techniques ensure optimal results, longevity, and proper operation. These practices reflect installation experience across hundreds of projects.
Electrical and Safety Considerations
Motorized TV covers require electrical connections—either hardwired or plugged into outlets. Plan power routing before installation begins. For hardwired systems, work with a licensed electrician to install dedicated circuits or junction boxes. For plug-in systems, ensure outlets are accessible without visible cord runs that detract from the installation.
Consider adding a switched outlet that allows cutting power to the TV cover motor completely. This simplifies service access and provides a backup shutdown method if remote controls or smart systems fail. Some installations incorporate whole-room automation where a single switch controls TV, cover, and lighting.
Achieving Perfect Alignment
TV covers must align precisely with televisions for clean appearance and proper operation. Minor misalignment becomes surprisingly obvious and can cause fabric wear over time. Use laser levels and multiple reference measurements to ensure perfect centering above your television.
For wall-mounted TVs, consider installing the cover mount and TV mount as a coordinated system. Measure and mark both positions before drilling, verifying alignment between them. This approach prevents the common problem of installing one component, then discovering the other cannot be properly positioned relative to it.
Testing and Fine-Tuning
After installation, test the cover through multiple complete cycles—fully open, fully closed, and intermediate positions. Listen for unusual sounds indicating binding or misalignment. Verify that the cover clears the TV at all points during operation. Make any necessary adjustments before considering the installation complete.
For motorized systems, test all control methods—handheld remote, wall switch, smart home integration, and limit settings. Program limit positions carefully; overly aggressive settings strain motors and shorten system life. Set gentle endpoints that stop the shade just before it reaches physical limits.
This resource is specific to printed tv covers.
More on printed tv covers.
How to Measure for Printed TV Covers
Measure your TV and mounting location for a perfect-fit custom printed cover shade.
Put this to work.
Our team helps specifiers, architects, and designers tailor printed tv covers to the job — get a quote, request samples, or start your design.